United States Stove Company KP5522-P, Manual

Page: 180 / 195

JJ Calibrations, Inc.
7724 SE Aspen Summit Drive
Portland, OR 97266-9217
Phone 503.786.3005
FAX 503.786.2994
Certificate of Calibration
Certificate Number:
743892
PO:
Property #:
Serial #:
User:
Model:
Description:
Make:
Accuracy:
*Recommended Due:
As Received:
As Returned:
Action Taken:
Order Date:
Procedure:
Calibrated on:
Technician:
°C % RH Environment: Department:
097
N/A
Unknown
03/18/2026
Other - See Remarks
03/18/2021
19
126
Calibrated
Raw Data
DCN 500901
N/A
1033
03/08/2021
097
Mass
Other - See Remarks
41
10 Lbs.
Authorized By: N/A
0723.01
Data is provided for your determination of acceptability. Received/returned without accessories.
484A Rice Lake 1kg-10kg (Class ASTM 1) Mass Set, 05/28/2021 699197
503A Rice Lake 1mg-200g (Class 0) Mass Set, 09/11/2021 729241
550A And (A&D) Co. HP-30K Balance 30 Kg 12/31/2021 739307
723A Rice Lake 1mg-200g (Class 0) Mass Set, 06/09/2021 723431
Std ID Manufacturer Model Nomenclature Due Date Trace ID
Standards Used
Parameter
Unit
UUT Uncertainty
Measurement Description Range
Measurement Data
Before/After
Accredited =
ü
Min Max Reference *Error
M a s s
g 3.5E-01 Raw Data
4535.92370000
4536.1022299 0.1785299
ü
0.0000000 0.0000000 g
Remarks:
* Many factors may cause the unit to drift out of calibration before the recommended due date. Any reported error is the absolute value between the reference and the unit.
PFS TECO
11785 SE Hwy 212
Suite 305
Clackamas, OR 97015
Calibration
Uncertainties include the effects of the unit.
*
*
Inspector Rev # Issued
15 03/25/2021
Reviewer
3
This instrument has been calibrated in accordance with the JJ Calibrations Quality Assurance Manual and is traceable to either the SI or to National Institute of
Standards and Technology (NIST). The quality system and this certificate are in compliance with ANSI/NCSL Z540-1-1994, ISO/IEC 17025-2017, ISO
10012-1, the ISO 9000 family and QS 9000. The expanded uncertainties of measurements for this calibration are based upon 95% (2 sigma) confidence limits.
Unless stated in the comments, certificates reflect the "Simple Acceptance Rule" as specified by JCGM 106:2012. Unless otherwise stated, a test accuracy ratio
(TAR) of 4:1, if achievable, is maintained. The results reported herein apply only to the calibration of the item described above. This report may not be
reproduced, except in full, without written approval of JJ Calibrations.
Page 1 of 1 Certificate: 743892