United States Stove Company KP5522-P, Manual

Page: 185 / 195

Calibration Certificate ID
072731-240-041621-ACC-USI
Software Version: 1.23.0.77
Report Version: 2.13.4 © METTLER TOLEDO
This is an original document and may not be partially reproduced without the
written permission of the issuing calibration laboratory.
Page 3 of 5
Error of Indication
As Found
Reference Value Indication Error of Indication Expanded Uncertainty k
1 0 lb 0.00 lb 0.00 lb N/A N/A
2 ¹
250 lb 250.00 lb 0.00 lb N/A N/A
3 ¹ 500 lb 500.00 lb 0.00 lb N/A N/A
4 ¹ 750 lb 750.00 lb 0.00 lb N/A N/A
5 1000 lb 1000.00 lb 0.00 lb N/A N/A
6 ¹
750 lb 750.00 lb 0.00 lb N/A N/A
7 ¹ 500 lb 500.00 lb 0.00 lb N/A N/A
8 ¹ 250 lb 250.00 lb 0.00 lb N/A N/A
9 0 lb 0.00 lb 0.00 lb N/A N/A
As Left
Reference Value Indication Error of Indication Expanded Uncertainty k
1
0 lb 0.00 lb 0.00 lb 0.028 lb 2.37
2 ¹ 250 lb 250.00 lb 0.00 lb 0.051 lb 2
3 ¹ 500 lb 500.00 lb 0.00 lb 0.10 lb 2
4 ¹ 750 lb 750.00 lb 0.00 lb 0.15 lb 2
5
1000 lb 1000.00 lb 0.00 lb 0.17 lb 2.05
6 ¹ 750 lb 750.00 lb 0.00 lb 0.15 lb 2
7 ¹ 500 lb 500.00 lb 0.00 lb 0.10 lb 2
8 ¹ 250 lb 250.00 lb 0.00 lb 0.051 lb 2
9
0 lb 0.00 lb 0.00 lb 0.028 lb 2.37
¹The calculated uncertainty was replaced by the CMC (Calibration and Measurement Capabilities) value because the calculated uncertainty
was smaller than the CMC value.
As Found
As Left
For improved legibility of the graphics
only increasing measurement points
are shown and measurement points
close to zero are not displayed.
The uncertainty stated is the expanded uncertainty at calibration obtained by multiplying the standard combined uncertainty by the
coverage factor k - which can be larger than 2 according to ASTM E898 and EURAMET cg-18. The value of the measurand lies within the
assigned range of values with a probability of approximately 95%.
The user is responsible for maintaining environmental conditions and the settings of the weighing instrument when it was calibrated.