16
STEP 3
After selecting your option as explained above, record your message.
A)
The LCD will read:
PRESS R
B)
Speak 6-12 inches away from the microphone. Referring to your script and speaking in a normal voice, press
and hold R (the word RECORDING will be displayed), releasing the key after you have completed
enunciating your messages. The word DONE will appear on the LCD when the maximum alotted time has
been reached.
C)
The LCD will read:
PLAY OGM
1(YES) 2(NO)
Press “1” to play back your recording
D)
The LCD will read:
ACCEPT
1(YES) 2(NO)
Press “1” to accept the recorded OGM.
Press “2” if you wish to re-record the message, beginning with Step 3.
Changing The OGM
After your system is up and operating, you may change the recorded OGM. To do so, simply scroll to the
programming section on your display:
PROGRAM: OGM
1(YES) 2(NO)
Select the option, then begin again from Step 3 above to record your new message.
Programming The Input
The Emergency Caller
is designed to be adaptable to a complete range of personalized applications. The input
can be programmed for full system customization. In addition to setting the Tone/Pulse and Standard telephone
line/PBX the user can specify the type of activation; Momentary or Continuous.
STEP 1
The LCD will read:
PROGRAM: INPUT
1(YES) 2(NO)
Press “1” to begin programming the input.
STEP 2
The LCD will read:
PROGRAM: MOM/CONT
1(MOM) 2(CONT)
Press “1” for momentary activation.
Press “2” for continuous activation
PRESS “M” TO EXIT PROGRAMMING MODE.
P r o g r a m m i n g
T h e E m e r g e n c y C a l l e r
NOTE: IF YOU ENTER THE WRONG CHOICE, PRESS “M” KEY REPEATEDLY AND
RETURN TO THE “PROGRAM MODE”, THEN SELECT THE SECTION TO CHANGE
(“1” ACCEPT SECTION, “2” FOR NEXT SECTION), THEN ENTER CORRECT
INFORMATION.
In the Program mode, a beep will be heard every 30 seconds. This is to indicate that the dialer
is not in the Off or Operate mode.