13
First Time Installation to Initialize Dialer Follow Steps 1 & 2.
Programming Telephone And/Or Pager Numbers
You are now ready to begin programming the dialer. All programming can be input before connecting the dialer
to a telephone line. Check the unit’s LCD as you program numbers in the dialer to ensure accuracy. Please
complete all programming instructions before attempting to operate the unit.
A maximum of 28 digits (including pauses) can be programmed in at each location.
*PROGRAM: NUMBERS SELECT: 1-4
1(YES) 2(NO ) 0(DONE)
STEP 1
Press location number 1-4 to program the first number. This can be any location 1-4. You do not have to
program locations in sequence. For example, you can program numbers in locations 2 and 4.
When you are
done programming all the desired telephone and/or pager numbers, press “O” to exit this section.
The LCD will read:
PAGER
1(YES) 2(NO)
STEP 2
Press “1” if you wish to program in a numeric pager number (step 3A).
Press “2” if you wish to program in a telephone number (step 3B), cellular phone numer (step 3B), or a voice
pager (step 3C).
STEP 3A- NUMERIC PAGERS
NOTE:
WHEN PROGRAMMING NUMERIC PAGERS, YOU MUST PROGRAM IN ONE OR MORE
PAUSES. EACH “P” PROVIDES A 2-SECOND PAUSE. BEFORE PROGRAMMING IN A PAGER, CALL
THE NUMBER TO DETERMINE THE NUMBER OF 2-SECOND PAUSES TO BE PROGRAMMED IN.
If you pressed “1” to program in a numeric pager…
Press the digits of the pager to be called. The numbers will appear on the LCD, as will the following key
designations.
Press “P” one or more times in accordance with the number of seconds needed to accommodate the pager.
(Remember, each “P” provides a 2-second pause).
Press the digits of the numeric pager code.
Press “*” to store the sequence.
P r o g r a m m i n g
T h e E m e r g e n c y C a l l e r
STEP 1
Apply power to the unit. The LCD will read:
NOT PROGRAMMED
PRESS KEYPAD #1
STEP 2
Press 1. The LCD will change to read:
EMERGENCY CALLER
USP (REVISION)
then:
PROGRAM: NUMBERS
then:
SELECT: 1-4
0(DONE)
*This prompt will appear after a number has been programmed and this section has been exited.
Before programming your dialer to call the police, fire department or 9-1-1 directly, you must check
with these agencies for their approval.
