2.3 Install the Charging Station
1. Secure back piece of the charging station mounting bracket to the wall or other suitable
structure with provided mounting screws. If installing to a wall, ensure the screws are
anchored into a suitable wall stud.
The back piece of the mounting bracket has 3 holes to support attachment to various surfaces.
Please use both provided screws to attach the back piece of the mounting bracket to the wall.
Mounting Screw Recommendations:
• For finished walls supported by wood studs, use #14 or M6 tapping screws. (Supplied)
• For masonry walls, use M6 mechanical screws. (Commercially available)
• Use following torque force:
Figure 2-7. Mounting bracket
16
Screw
Torque
M6
1/4”
50 kgf-cm
50 kgf-cm
43.4 lb-in
43.4 lb-in
2. Attach the front piece of the mounting bracket to the back of the charging station using
provided screws.
Figure 2-8. Mounting plate attachment
