5. Once the DIP Switch Setting is adjusted, reassemble the charging station.
Reinstall the top cover to the charging station using the following torque force to secure the (4)
socket cap screw:
Screw
Torque
M6
16 kgf-cm 13.88 lb-in
2.2 Tools & Parts Required for Installation
Table 2-1 Tools & parts required for installation
Tool
Size
Source of Supply
Remark
Mounting Bracket
Mounting Screw
x2
Mounting Screw
x4
Anchors
x4
EasyEvPlug
™
Socket cap screw
x4
Allen key
Philips Screwdriver
255 x148 x 36 mm
#14
#8
#8
58 x 58 x 70 mm
5/16”
PH3
M4
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Commercially Available
Commercially Available
For installing charging station
to the wall/structure
For installing the Mounting
Bracket to the wall/structure
For installing the EasyEvPlug
™
to the wall/structure
For installing the EasyEvPlug
™
to the wall/structure
To store the EV charging Plug
and Cable
For mounting enclosure plate
to the back of the enclosure
body
For Charging Station Cover
Screws
For Holder Installation and
Optional Hardwire Install
15
Allen key
3/16”
Commercially Available
For installing the enclosure
plate to the back of the
station body.
