The configurable parameters for OEM Register read and operations are identical to those in
section 3.7.11.1.
Register Type LinkProfile
Selecting the LinkProfle Register Access option displays the dialog shown in the figure below.
From this dialog, the user can perform read and write access to the registers of individual link
profiles.
LinkProfile Registers Page
The configurable parameters for OEM Register read and write operations are identical to those
in section 3.7.11.1, except that a Profile Id parameter is provided in order to perform the read
and write operations on a specific link profile.
Known Issues
z
The application does detect new readers that become active after the application has
started. You should power on and connect your readers prior to starting the Tracer
application.
z
The names of detected readers are displayed as ASCII only in the Device menu.
z
Truncation is not supported in the Firmware Release v2.4.2, so selecting it in the Select
criteria will render an error.
54
Copyright 2012 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
