Figure 23
10.15.8.. Select Create Device and enter your weather station information. After registering your station, make a note of
the following:Weathercloud ID and Key
Enter the Weathercloud ID (ID), Key (password) into the.
Note:
The current temperature and humidity data is the transmitter of CH1 (so it must on the outside).
11. Upload Setting
11.1.. When you first power up(AC) the console, or press and hold the MIN/MAX/-(WiFi) button for three seconds in
normal mode, the console icon(above the DAY icon)
will flash to signify that it has entered WAP (wireless
access point) mode, and is ready to enter for WIFI settings.
11.2. Use your smart phone, tablet, or computer to connect to the console through WiFi(reference:
Example 1-4 of WiFi
Setting
).
11.3.Once connected, enter the following IP address into any browser’s address bar:
http://192.168.5.1/upgrade.html
Figure 24
11.4.Connection success, it will jump to “Upload Setting” screen automatically.
