19
3
Setting Procedures
19
Setting Procedures
Chapter
3
Initialization of the system settings
"Initialize" button
System setting values inside the TM201 are
initialized.
When this button is clicked, a confirmation
dialog is displayed. With this operation, settings
on the PC and inside the TM201 are initialized
and cannot be restored; therefore, click the "Yes
(Y)" button only when it is absolutely necessary
to initialize.
When the system setting protection is ON, initialization cannot be performed.
Refer to P.44 "7-1.List of setting values" for default values.
Automatic deletion of waveform (CSV) files
When this item is checked, files are deleted from
the oldest if the number of files exceeds 1000 after
waveform data acquisition.
Remove this check to prevent automatic deletion.
When the check is removed and the number of files exceeds 1000 after waveform data acquisition,
the following confirmation dialog appears.
When the "Yes (Y)" button is clicked, old files over 1000 are deleted.
When the "No (N)" button is clicked, files are not deleted.
If "Do not display this message again ... and delete old files automatically." is checked and "Yes
(Y)" is clicked, old files over 1000 are deleted and "Delete waveform (CSV) files automatically. " is
checked. Files will be deleted automatically when waveform data files are saved next time.
History files are saved in “My Documents\UNIPULSE\TM201” directory.
Check