WARNING
II
WARNING
II
WARNING
●
For the entire system to function safely when the F701-P becomes faulty or malfunctions,
provide a safety circuit outside the F701-P.
●
Since the F701-P has no power switch, install a breaker.
●
Before using the F701-P as described below, make sure to consult with our sales personnel.
- Use in environments not described in the operation manual.
- Use greatly impacting human lives and assets, such as medical devices, transport devices
entertainment devices, and safety devices.
●
Do not disassemble, repair, or modify the F701-P. Doing so may cause a fire or an electric
shock.
●
Do not install in the following environments.
- Places containing corrosive gas or flammable gas.
- Where the product may be splashed with water, oil or chemicals.
●
Do not connect a commercial power source directly to the signal input/output terminals.
●
Be sure to ground the protective ground terminal.
●
The attached AC cable is designed for domestic use in Japan, and its rating is 125V AC, 7A.
For use at voltages exceeding the rating and for overseas use, have a separate AC cable
prepared.
●
Before performing the following, make sure that no power is applied.
- Attachment/detachment of connectors of options, etc.
- Wiring/connection of cables to the signal input/output terminals.
- Connection to the ground terminal.
●
For connection to the signal input/output terminals, check the signal names and pin
assignment numbers, and then carry out wiring properly.
●
Do not connect anything to unused terminal(s).
●
Before applying power, carefully check the wiring, etc.
●
Use a power supply voltage and load within the specified and rated ranges.
●
Do not damage the power cord. Doing so may cause fire or electric shocks.
●
Do not touch any signal input/output terminal while applying power. Doing so may cause
electric shocks or malfunctions.
●
If the cover of the main body is opened, it may cause an electric shock internally. Even if the
power is off, the internal capacitor is charged. Contact us for internal inspection or repair.
●
In the case of smoke, an abnormal smell or strange sound, immediately turn off the power,
and disconnect the power cable.
This sign forewarns the presence of hazards
that could result in serious injury or fatality
when incorrectly handled.
Warning on design
Warning on installation
Warning on wiring
Warning during startup and maintenance
Summary of Contents for F701-P
Page 1: ...01AUG2020REV 1 07 WEIGHING INDICATOR F701 P OPERATION MANUAL...
Page 11: ...Contents X Contents X M E M O...
Page 116: ......