Unipulse F701-P, Operation Manual

Page: 15 / 116

4
1 OUTLINE
4
O
U
TL
IN
E
Chapter
1
Lights when tare subtraction is performed.
Blinks when the tare weight is displayed by setting mode 1-9 "tare display."
Lights when the net weight is displayed.
Goes out when the gross weight is displayed.
Lights when the gross weight is displayed.
Goes out when the net weight is displayed.
The contents of the display differ according to the setting of the comparison mode. (Comparison
timing in weighing function 1 of setting mode 1-4)
●
When comparison mode 0 (upper/lower limit comparison mode) is set
Lights when the weight value > upper limit setting value.
Lights when the lower limit setting value
≦
weight value
≦
upper limit setting value.
Lights when the weight value < lower limit setting value.
●
When comparison mode 1 (over/under comparison mode) is set
Lights when the weight value > (target value + over).
Lights when (target value - under)
≦
weight value
≦
(target value + over).
Lights when the weight value < (target value - under).
●
When comparison mode 2 (discharging control mode) is set
Lights while the complete signal is output.
Lights when the weight value
≧
(final - compensation).
Lights when the weight value
≧
(final - Set point 2).
Lights when the weight value
≧
(final - Set point 1).
⑤
Setting keys
Pressing
→
immediately executes Accumulation Clear
(when in setting mode 0).
Numeric keys to make settings.
Function key to change the setting mode.
⑥
Function keys
< TARE >
Pressing this key immediately performs tare subtraction to zero the net weight.
At the same time,
“ “ lights.
<
▲
>
While a setting item is displayed, this key functions to change the selected item
number. Also, while an item is changed, this key functions to increment the
numerical value of each digit by one.
-