Unipulse F701-P, Operation Manual

Page: 97 / 116

86
9 RS-485 INTERFACE
86
R
S-4
85
IN
TE
R
FA
C
E
Chapter
9
Input status
G/N
Turns ON when the weight displayed by the indicator is net,
and turns OFF when it is gross.
Total limit Indicates the state of the total limit signal.
WEIGHT ERROR Turns ON when the weight is abnormal. (*1)
ZALM
Turns ON when a zero alarm is given (ZALM on the indicator
is ON).
LOCK1 Indicates the state of setting LOCK1.
LOCK2 Indicates the state of setting LOCK2.
Input register
Status 1 Shows weight condition. (*2)
Status 2 Shows weighing condition. (*3)
Gross weight Shows gross weight. (-99999 to 99999) (*4)
Net weight Shows net weight. (-99999 to 99999) (*4)
Tare weight Shows tare weight. (0 to 99999) (*4)
Holding register
Upper limit Shows upper limit. (0 to 99999)
Lower limit Shows lower limit. (0 to 99999)
Near zero Shows near zero. (0 to 99999)
Set point 1 Shows set point 1. (0 to 99999)
Set point 2 Shows set point 2. (0 to 99999)
Final (target value) Shows final (target value). (0 to 99999)
Weighing function 1 Shows weighing function 1.
Tare setting Shows tare weight. (0 to 99999)
Total limit Shows total limit. (0 to 999999999)
Balance weight value Shows balance weight value. (0 to 99999)
Capacity Shows capacity. (1 to 99999)
Display selection Shows display selection.
Gravitational acceleration
Shows 4 digits after decimal point of gravitational acceleration.
(9.
7500
to 9.
8500
)
Latest accumulation data Shows latest accumulation data. (0 to 99999)
Accumulation value Shows accumulation value. (0 to 999999999)
Compensation Shows compensation. (0 to 9999)
Over Shows over. (0 to 9999)
Under Shows under. (0 to 9999)
Comparison inhibit time Shows comparison inhibit time. (0 to 999)
Judging time Shows judging time. (0 to 99)
Complete output (hold) time Shows complete output (hold) time. (0 to 99)
Weighing function 2 Shows weighing function 2.
Digital low pass filter Shows digital low pass filter. (0 to 5)
Moving average filter Shows moving average filter. (1 to 512)
Motion detection (period - range) Shows motion detection (period - range). (00-00 to 99-99 *5)
Zero tracking (period) Shows zero tracking (period). (0 to 99)
Zero tracking (range) Shows zero tracking (range). (0 to 9999)
Total comparison selection Shows total comparison selection. (0 to 2)
Count limit Shows count limit. (0 to 9999)
Key invalid Shows key invalid.
LOCK 1 and 2 Shows LOCK.
External input selection Shows external input selection.
External output selection Shows external output selection.
Min scale division Shows min scale division. (1 to 50)
DZ regulation value Shows DZ regulation value. (0 to 9999)
Accumulation count Shows accumulation count. (0 to 9999)