Unipulse F350, Operation Manual

Page: 61 / 115

48
6 EXPLANATION OF COMPARISON FUNCTIONS
48
EX
PLAN
ATION
OF C
O
MPAR
IS
ON FUN
C
TION
S
Chapter
6
6-5.
Calculation comparison timing
Set the operating conditions of calculation HI/LO limit comparison. Select the conditions from the
following.
0
：
All time HI/LO limit comparison is always performed.
1
：
Stable HI/LO limit comparison is performed when the calculated
value is stable.
2
：
Near Zero OFF HI/LO limit comparison is performed when Near Zero is
off.
3
：
Stable and Near Zero OFF HI/LO limit comparison is performed when the calculated
value is stable and Near Zero is off.
4
：
Hold HI/LO limit comparison is performed when a hold is
fixed.
■
Calculation comparison timing setting method
1.
Select setting mode1.
Press once.
2.
Set "Calculation comparison timing."
Press once.
⇒
"Calculation function
select" is displayed.
Press , and the highest digit blinks.
Input the setting value with .
（
Initial value
：
0
）
Press to validate it.
3.
Press twice to go back to the indicated
value display.
Ch1 Ch 2
H I
LO
H I LO
FNC
H I
Ch1 Ch 2
OK LO PEAK HOLD
H I LO H I LO
Undefined
Calculation comparison OK
0 0 0 0
Calculation comparison timing
Undefined
0
：
All time
1
：
Stable
2
：
Near Zero OFF
3
：
Stable and Near Zero OFF
4
：
Hold
output condition
《
Setting value
》
ESC