Introduction
Sageon II 200A (N+1) Power Distribution System
PM990-5202-200, Rev. 6
1-4
Operator Panel
Mounted in the system is a modular, hot-swappable controller, which includes a high-resolution 2-line
digital display for monitoring of the Sageon 200A output current and voltage. Six push buttons are
available for operating the Sageon 200A, selecting display information, and for changing editable
parameters. A complete system configuration can be created at the operator panel. Three system status
LEDs are provided.
Communications
PC-based configuration and monitoring is available with the UNIPOWER Sageview™ software.
Sageview is a tool to exchange configurations and operating data between the Sageon 200A and the PC
on which Sageview is running. Local PC access is provided through a supplied USB-B connector on the
front panel of the controller using the Sageview software.
Remote PC access across an ethernet network is optionally available. The PC must be running Sageview
software and have a unique IP address on the network. An ethernet RJ-45 jack is provided for connecting
to your company’s intranet or to the Internet. A unique IP address is required for each Sageon 200A.
Remote access is also available via an optional SNMP/ethernet board or ethernet board (without SNMP
support).
Alarms
Activation of customer-supplied alarm annunciators is accommodated by form-C relays. The relay state
is user selectable between normal mode (normally de-energized) and failsafe mode (normally energized).
These relays provide for external annunciation of the following alarms: rectifier shutdown, high voltage
(HV) shutdown, and three user defined relays. Refer to Sageview help for configuring these relays.