Sageon II 200A (N+1) Power Distribution System
Sageview
PM990-5202-200, Rev. 6
5-1
5.0 SAGEVIEW
Sageview
™
system monitor software enables configuring and monitoring of a Sageon 200A from a local
or remote personal computer (PC). Figure 5-1 shows the various access options.
Local monitoring involves a PC connected to the USB connector on a system’s operator panel.
Remote monitoring also connects a Sageon 200A to a PC, however, they can be separated by a few feet or
by hundreds of miles. Your company’s ethernet network or intranet, the Internet, or a pair of telephone
modems can provide the interconnection.
Refer to TG990.4262.10 for more details on Sageview.
Intranet, Local Network; Ethernet
Internet
Server with
Firewall
Remote
PC with
SageView
Ethernet
Network
PC with
SageView
Operator Panel,
SageView Control
Unit (SCU), and
Interface Board
Local Outputs to:
User's Alarm System
Data Logging
Status
Measured
Variables
C
D
0002
6a
Modem
Remote
PC with
Modem
and SageView
Rectifier 1
Rectifier 2
Rectifier n
...
DC Bus
Power Plant with Battery String(s)
Control
Signals
Power Plant with Battery String(s)
RS-232C
Local PC
with
SageView
Distribution
Battery String(s)
To User
Loads
FIGURE 5-1 NETWORK CONNECTIONS
5.1 CONFIGURATION
Use Sageview to develop a completely new configuration and then upload this configuration to a
connected Sageon 200A. If an operating configuration requires minor parameter value changes, download
the configuration from the system to the PC, edit as needed, and then uploaded to the same system or to
another connected system.
5.1.1 Sageview benefits:
•
Saves time since configuration development and Sageon 200A installation can proceed
simultaneously
USB
