Page 6
SAFETY
(Continued)
SAFETY DURING INSTALLATION (Continued):
3. The power supply wire gauge and insulation must be sufficient to meet the
power requirements for the machine.
4. Only fuses of the correct type voltage rating and current rating should be
used. Refer to the Union Tool wiring diagram equipment parts list for
fuse recommendations. Using incorrect or non-recommended fuses can
present a fire hazard.
Pneumatic:
Union Tool has installed a lockout, three-way, manual valve in
the air supply line to the filter/regulator. This valve makes it
possible to relieve air pressure and lock out the pneumatic system
before undertaking maintenance or repairs.
SAFETY DURING OPERATION:
DO NOT
operate Union Tool equipment under the following conditions:
1. Near volatile or otherwise explosive gases or materials.
2. Without the covers, panel and safety guards properly installed.
