Page 9
Location
The machine should be located with due consideration for the movement of
materials in and out of the machine and the ease of movement required by the
operator.
Mounting holes are provided in the "feet" of the machine for the purpose of
leveling. The machine must be on a solid, level surface and a spirit level
should be used longitudinally on the channel at the top of the machine and on
the lateral top section of the frame. The machine must be secured to the floor
by bolts or equal to ensure stable running.
WIRING
Make sure proper wiring is carried out to prevent damage to the circuit. Refer
to packing list or wiring diagram inside the electrical control box. This will
ensure correct voltage to all motors.
MACHINE SHOULD BE GROUNDED FOR SAFETY OF OPERATOR.
