Union Community Virdi 4000 User Manual Download Page 5

Page: 5 / 60

VIRDI 4000 User Guide

Union Community CO., LTd. 44-3 Hyundai Topics Building 5, 6 floor, Bangi-dong,
Songpa-gu, Seoul, Korea 138-050, Tel: 82-2-6488-3000, Fax: 82-2-6488-3099,
E-Mail:[email protected], http://www.unioncomm.co.kr

1. Before use

1.1. Safety precautions

Warning

Handling  with  wet  hands  or
allowing  liquid to flow into it
is not advised.

-> It may cause an

electric shock or damage.

Do not place a fire source

near the unit.

-> It may cause a fire.

Do not disassemble, repair,

or modify the unit.

-> It may cause an electric
shock, fire or damage.

Keep  out  of  reach  of
children.
->  It  may  cause  an
accident or damage.

If the above warnings are ignored, it may result in death or serious injury.

Cautions

Keep away from direct
sunlight
->

may

cause

deformation

color

change.

Avoid high humidity or
dust ->The unit may be
damaged.

Avoid

using

water,

benzene,

thinner,

alcohol for cleaning

-> It may cause an electric
shock or fire.

Do  not  place  a  magnet
close to the unit.
->  The  unit  may  break
down or malfunction.

Do not contaminate the
fingerprint input area.
-> Fingerprints may not be

well recognized.

Avoid  using  insecticides
or flammable  sprays  near
the unit.
->

may

result

deformation

color

change.

Avoid impacts or using
sharp objects on the unit.
->

The

unit

may

damaged and broken.

Avoid severe temperature
changes
-> The unit may be
broken.

- If the above cautions are ignored, it may result in property loss or human injury.

※

Under no circumstances will Union Community be responsible for accidents or damages caused

by inappropriate use of the product caused by not referring to the user manual.

Summary of Contents for Virdi 4000




























































Search results

Summary of Contents for Virdi 4000

Reviews:

Brands by name

Popular brands

Union Community Virdi 4000, User Manual

Search results

Summary of Contents for Virdi 4000

Reviews:

Brands by name

Popular brands