4: Operation
4-12
UPS453-01-00 MINIpowerPLUS User Manual Dated 08-03-12
4.4.6 Tools
Menu
Signalling Test:
This provides a facility to test the Green, Yellow and Red led warning indicators together
with the audible warning device.
LCD Display Test:
Tests the alpha-numeric LCD display. All LCD display characters should illuminate when
the ENTER key is pressed.
Battery Test:
Provides a battery test. Contact your service centre if the test fails.
Battery Calibration:
Calibrates the batteries by calculating the discharge curve. This test should be carried
out after the batteries have been charged so that the UPS is able to provide precise information on the
charge status.
4.5
Diagnostic Software
The UPS is fitted with a standard RS232 interface that can be used to provide computer access to data
relating to the operation of the UPS and its log. A suitable interface programme for Windows® computers is
available from our web-site (www.upspower.co.uk). An RS232 cable is required to connect a serial port on
your PC to the interface outlet on the rear of the UPS.
UPS Status
UPS Setup
Events
Scheduling
Tools
MAIN MENU
ENTER to activate test of Red/Yellow/Green lights and audible sounder.
ENTER to activate test. All alpha/numeric characters should display on LCD
ENTER performs a functional check of the batteries.
ENTER calculates battery discharge curve to enable SOC calculation
Signalling Test
LCD Display Test
Battery Test
Battery Calibration
TOOLS
Summary of Contents for Minipower Plus Rack
