UNIMO Technology MPEG-2 User Manual Download Page 75

Page: 75 / 125

UDR-204(C) Operation manual Revision 3.0

3.11.2.3.2 Next screen

Press Button “RIGHT” and next screen is played back.

3.11.2.3.3 Previous screen

Press Button “LEFT” and previous screen is played back.

3.11.3 Playback the backed up-image

This function means that the images in the backup HDD that were backed up manually or

automatically from the recorded images in the system are played back.

The functions for Playback of backed up images, screen during playback, control during

playback are same as those of Playback of Recorded images, as the paragraph 3.11.1

3.12 Miscellaneous Menu

Figure 3-57 Miscellaneous Menu

This menu is to use the five functions that are placed only on the remote control but

on the keypad of the unit

3.12.1 NET

Displays the current network IP and the user connected to the network.

(it substitutes the NET button on the remote control).

Summary of Contents for MPEG-2






























































































































Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands

UNIMO Technology MPEG-2, User Manual

Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands