background image

                                                     
                                                                                                                                                                        58 

UDR-204(C) Operation manual Revision 3.0 

 

 

 

This is a part of installation, actual system password, related function and password 

application. 

 

3.7.2.1 Password 

Setting 

To change system password: 

First, type-in the current password, confirm.    Then if it is correct, type-in the new password 

twice.    If they match, the password has been changed. 

Users can use any numeric number from 0~4, combined 6 units. 

Password input screen (present, new, confirm, if it is wrong -twice, confirm to change) 

 

 

 

Figure 3-37 Password input screen 

 

3.7.2.2 Password 

Apply 

Determine whether the system password has to be applied to power On/Off. The applicable 

features are recording close, enter menu, system off. Users can set up password ON/OFF 

for each feature. 

Setting to On, when each feature starts, users have to confirm password for each step. 

Setting to Off, users can use any confirmation of password. 

Summary of Contents for MPEG-2






























































































































Reviews: