UNIMO Technology MPEG-2 User Manual Download Page 87

Page: 87 / 125

UDR-204(C) Operation manual Revision 3.0

progress rate. Even backup, users can stop it by pushing

button. Close DVR

backup window with pushing

button. (Even backup mode, it will be stopped &

closed.)

4.3.11 DVR

Setting

This button is for linking into quick installation program is used to manage setting

parameter of DVR easily. It can be activated after logging in by admin.

4.3.12 Still image Capture

Yon can save playing image such as live viewing image, DVR playback image,

into still image by capture. Besides users can capture image by pushing capture button for

each channel or push capture button at the foot of a screen. Still image will be saved in a

path frame directory established in RAMS’s setup section screen. If user change storage

path of still image at setup window, still image will be recorded to destination in the future.

Summary of Contents for MPEG-2






























































































































Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands

UNIMO Technology MPEG-2, User Manual

Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands