UNIMO Technology MPEG-2 User Manual Download Page 67

Page: 67 / 125

UDR-204(C) Operation manual Revision 3.0

3.8.1 Backup

Device

Set up the device for backup. HDD / USB/ CD-RW are available

In order to use HDD for backup, the function of HDD should be setup as “Manual Backup”

In the HDD Setting.

3.8.2 Start

Time

Input the start of backup date and time.

3.8.3 End

Time

Input the end of backup date and time.

3.8.4 Channel

Choose the channel to backup.

3.8.5 Event

Choose the event to backup. In case of none mode, selected files according to time will be

backed-up.

3.8.6 Backup

Start

Based on the input date, time, channel and event & other condition search the images will be

backed-up to the chosen device. Back up progress rate is marked on the bottom right side of

the screen.

3.8.7 Format

This menu is used only when backup device is CD-RW. In case that backup device is CD-

RW, format command has to be done by this menu, before starting backup.

However, with CD-R media, backup can be started without format.

Summary of Contents for MPEG-2






























































































































Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands

UNIMO Technology MPEG-2, User Manual

Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands