UNIMO Technology MPEG-2 User Manual Download Page 108

Page: 108 / 125

108

UDR-204(C) Operation manual Revision 3.0

①

Indicates the file location of the captured still Image

②

Indicates the file location of the watermark image to be inserted in the still image

③

Select language

④

Set up whether alarm occurrence is on or off when motion detection or sensor icon

activated.

⑤

Check the image among 4channels

⑥

Check the image among 9 channels

⑦

Close the Screen after storing the setup

⑧

Cancel the Screen without storing the setup

4.5.7

Link with UniPlayer

Click this button in the main screen to start Uniplayer.

Please refer to the UniPlayer section.

4.5.8 PAN/TILT,

ZOOM/FOCUS

These buttons are for PAN/TILT, ZOOM/FOCUS of DVR.

After logging in by admin, please select one channel.

4.5.9 HDD

Information

ORANGE: used parts of HDD,

WHITE: remaining part of HDD. This menu indicate the detailed HDD information

Summary of Contents for MPEG-2






























































































































Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands

UNIMO Technology MPEG-2, User Manual

Search results

Summary of Contents for MPEG-2

Reviews:

Related manuals for MPEG-2

Brands by name

Popular brands