Uniks C6, Manual

Page: 9 / 28

9
•
Press and hold this key for more than 2 seconds during the manual
range to switch back to the automatic range.
•
During the AC current and AC voltage automatic measuring, press and
hold the " LPF/RAN " button for about 2 seconds to turn on or off the
LPF mode.
10. Maximum/Minimum value button
•
When at the voltage, current, resistance and temperature positions,
tap the " MIN/MAX " button to switch between displaying the
maximum and minimum values.
•
Press and hold the " MIN/MAX " button for more than 2 seconds to
exit the maximum and minimum value measurement.
11. Function selection button
•
In " " position, it is used to switch between current value and
current frequency.
•
In " " position, it is used to switch between the frequency of AC
voltage, DC voltage and AC voltage.
•
In " " position, it is used for switching between resistance,
capacitance, diode measurement and open-closed measurement.
•
In " Hz% " position, it is used to switch between frequency and duty
ratio.
•
In"
℃℉
"position, It is used to switch between the temperature units
of
℃
and
℉
.
•
In " " position, it is used to switch between DC voltage and AC
voltage.