Uniks C6, Manual

Page: 15 / 28

15
3. Read the measured temperature value.
3.11 Low impedance AC/DC voltage measurement
1. Set the function range switch to " " position.
2. Tap the " SEL " button to switch between AC and DC voltage
measurement modes and connect the probes to the measured signal.
Caution:
When measuring low impedance voltage, the
maximum measurement time shall not exceed 1
minute, and intervals between measurements shall be
more than 20 seconds to avoid burning-out caused by
excessive heating of load resistance.
3.12 Automatic Shutdown
When there is no operation within 10 minutes after startup, the
instrument will enter the sleep state and automatically shut down to save
power. After the automatic shutdown, tap the " SEL " button, and the
instrument will start up and enter the working state again.
3.13 Precision Indicators
•
Accuracy: ± (% r digits).
•
Warranty period: 1 year from the date of delivery.
•
Working environment temperature: 18 ℃ ~28 ℃ .
•
Working environment humidity: no greater than 75%.
•
Temperature coefficient: 0.1 × accuracy/1 ℃ .