Uniks C6, Manual

Page: 6 / 28

6
Cautions
•
Please read the instructions carefully before using the instrument,
and pay special attention to the contents of "
". Please follow the
operating instructions of " ".
•
Ensure that the instruments and probes coming with the package
meet the requirements of safety standards. If the probe is damaged,
replace it with a probe of the same model or electrical specification.
•
Before use, check the instrument and probes. If the probe is exposed,
the housing is damaged, and the display is abnormal, do not measure.
•
When measuring, do not tap the unused input terminal.
•
When the measuring voltage is higher than 60V DC or 30V AC, be
careful and remember to keep your fingers behind the hand shelter
of the probe.
•
When the range of to-be-measured value is uncertain, set the
function range to the maximum range position. Do not exceed the
input limits specified for each range.
•
Do not measure a voltage higher than the allowable input value.
•
Before switching the function range switch, the probe shall leave the
circuit under test.
•
Before conducting in-circuit resistance measurement, cut off the
power supply and release all charges at both ends of all capacitors.
•
Do not expose the instrument to strong light, high temperature or
humidity.
•
Do not tap bare wires, connectors or circuits being measured with
bare hands.
Packing List
•
Operation manual x 1
•
Probes x 2
•
Temperature probe x 1
•
Packing box x 1
•
1.5V SIZE AAA batteries x 3