Unigas HRX2060, Manual Of Installation - Use - Maintenance

Page: 34 / 116

PART III: OPERATION
34
choose the Summertime/Wintertime mode desired and cofirm by pressing ENTER; press ESC to exit. Set the time zone (Time EU/US)
in the same way.
Languages : it allows setting the current language
choose the desired language and cofirm by pressing ENTER; press ESC to exit.
DateFormat : it allows setting the date format as DD-MM-YY (day-month-year) or MM-DD-YY (month-day-year)
choose the desired format and cofirm by pressing ENTER; press ESC to exit.
PhysicalUnits: it allows setting the measuring units for temperature and pressure
Settable temperature units: °C or °F
Settable pressure units: bar or psi.

choose the desired unit and cofirm by pressing ENTER; press ESC to exit.

choose the temperature and pressure unit and cofirm by pressing ENTER; press ESC to exit.
System lockout
If the system locks out, the following message will appear:
call the Technical Service and tell the message data.
Cold start thermal shock (CSTP)
If the generator cannot suffer thermal shocks, the CSTP (Cold Start Thermal Schock) function can be enabled. This function is already
set by the Technical service (access by reserved password).
if this function is enabled, when the burner starts upthe “Thermal shock protection activated” message will be showed.
If this function is not enabled, after startup, the burner will rapidly increase the load according to the requested value and, if necessary,
Sum/Winter Time
Time EU/US
Language
Curr::
Italiano
New: English
DateFormat
Curr::
DD-MM-YY
New: MM-DD-YY
UnitTemperature
UnitPressure
1 10.08.07 13.47
C:71 D:00 F: 12
Start No. 88
Load 0.0 Gas