Unigas HRX2060, Manual Of Installation - Use - Maintenance, Page: 24 / 116

PART II: INSTALLATION
24
Suntec T
"Note: pump with “C” rotation.
Suntec TV Pressure governor
Oil viscosity 3 ÷ 75 cSt
Oil temperature 0 ÷ 150 °C
Min. suction pressure - 0.45 bar to avoid gasing
Max. suction pressure 5 bar
Rotation speed 3600 rpm max.
Pump Suntec AS47 A
Viscosity 2 ÷ 12 mm²/s (cSt)
Fuel temperature 0 ÷ 60 °C
Maximum inlet pressure 2 bar
Minimum inlet pressure - 0.45 bar to avoid gasing
Maximum Return pressure 2 bar
Maximum speed 3600 rpm
Key
1 Inlet G3/4
2 Pressure gauge port G1/4
3 Vacuum gauge port to measure the inlet vacuum G1/4
4 To pressure adjusting valve G3/4
Key
1. Pressure regulator
2. Pressure gauge port
3. Vacuum gauge port
4. Solenoid valve
5. Delivery to nozzle
7. Inlet
8. Return
Pressure adjustment
Remove cap-nut 1 and the gasket 2, unscrew the lock nut 4. To increase
pressure, twist adjusting screw 3 clockwise.
To decrease the pressure, twist screw counterclockwise. Tight the lock
nut 4, refit the gasket 2 and the cap nut 1.
Key
1 Cap nut
2 Gasket
3 Adjusting screw
4 Lock nut
5 Gasket
Speed Sensor
AGG 5.310
is a speed sensor kit used to monitor the speed of a motor. This kit is used to mount the speed sensor directly on the motor casing.