Unigas HP60, Manual Of Installation - Use - Maintenance

Page: 11 / 60

C.I.B. UNIGAS - M03957CI
11
Performance Curves
To get the input in kcal/h, multiply value in kW by 860.
Data are referred to standard conditions: atmospheric pressure at 1013mbar, ambient temperature at 15°C
NOTE: The performance curve is a diagram that represents the burner performance in the type approval phase or in the laboratory
tests, but does not represent the regulation range of the machine. On this diagram the maximum output point is usually reached by adj-
suting the combustion head to its “MAX” position (see paragraph “Adjusting the combustion head”); the minimum output point is rea-
ched setting the combustion head to its “MIN” position. During the first ignition, the combustion head is set in order to find a
compromise between the burner output and the generator specifications, that is why the minimum output may be different from the Per-
formance curve minimum.
BACK PRESSURE
IN
COMBUSTION CHAMBER mb
ar
HP60 MG.xx.x.xx.A.0.40
kW
HP60 MG....50/65
kW
BACK PRESSURE IN
COMBUSTION CHAM
BER
mbar
HP65 MG....50/65
kW
HP72 MG.....0...
kW
BACK PRESSURE IN
COMBUSTION CHAM
BER
mbar
HP72 MG.....1...
kW
HP73A ..1...
kW
-2
-1
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600
-2
-1
0
1
2
3
4
5
6
7
8
100 200 300 400 500 600 700 800 900
0
1
2
3
4
5
6
7
8
9
200 300 400 500 600 700 800 900 1000
-2
0
2
4
6
8
10
12
14
0 200 400 600 800 1000 1200 1400
-2
0
2
4
6
8
10
12
200 400 600 800 1000 1200 1400 1600 1800
0
2
4
6
8
10
12
0 500 1000 1500 2000 2500