TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
64
6. Handset Configuration
4
Select the service to be used:
•
Phone Call
•
Send a message to predefined number (prompt for the message text)
•
Send data to message service centre (predefined data and/or prompt for the
data)
•
Edit alarm data
•
PTT
5
In the Service user data field, enter the data to be sent/dialed when using the
service.
NOTE: This field is not applicable for PTT.
6
In the Service prefix for user data field, enter the prefix for the service user data
(if needed).
7
In the Service index field, enter the corresponding index used for PTT. For
example, if PTT group 1 is configured (located under Push-To-Talk >
1
), the
service index must be set to
1
.
NOTE: This field is only applicable for PTT.
If the PTT is not configured, continue, with
6.14 Push-To-Talk (PTT) Group Call
.
TIP: It is also possible to configure soft keys to reach services quickly, see
6.5.15
Shortcuts
on page 42.
6.14 Push-To-Talk (PTT) Group Call
NOTE: Applicable for WL3 Plus only.
To be able to configure a PTT session, the following must be known:
•
The number to the PTT group (defined in the WSG)
•
The PTT group numbers in OSCAR
•
The phone number to the conference bridge
TIP: For more information about the PTT function, see also Function Description,
Ascom VoWiFi System for Siemens, TD 92947EN or User Manual, WL3 WLAN
Handset and WL3 Plus WLAN Handset, TD 92929EN.
NOTE: If Music on Hold (MOH) is used in the system, it can affect an ongoing PTT
group call. If someone in the group conference answers another incoming call,
MOH is played for the whole group.
1
Configure the PTT group in OSCAR.
2
Open the WinPDM. Select Push-To-Talk > X (where X represents 1-10).
3
In the Session name field, enter a name to identify the PTT session.
4
In the Group number field, enter the number for the PTT conference group.
5
In the Display text field, enter the text to be shown in the display during the PTT
session.
6
In the PTT session signal drop-down list, select the indication of the PTT
session.
7
In the Conference number field, enter the phone number to the conference
bridge.
