TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
43
6. Handset Configuration
1
Select Shortcuts > Hot keys X (where X is 0, 2 - 9).
2
Continue with
Additional Shortcut Settings
on page 43.
Configure a Soft Key
NOTE: When programming Soft keys, both name and function must be set.
1
Select User Profiles > Normal/Profile X > Soft keys > Soft key X (where X is Left,
Middle, or Right)
2
In the Soft key name field, enter the name of the soft key shortcut to be displayed
in the handset.
3
Continue with
Additional Shortcut Settings
on page 43.
Configure a Navigation Key
1
Select Shortcuts > Navigation Key X (where X is Up, Down, Left, or Right)
2
Continue with
Additional Shortcut Settings
on page 43.
Configure the Multifunction Button
1
1
Select Shortcuts > Multifunction Button X (where X is Longpress or Multipress)
2
Continue with
Additional Shortcut Settings
on page 43.
Additional Shortcut Settings
1
In the Function drop-down list, select the function to be used:
•
Phone call
•
Phone call “Loudspeaker mode”
•
Call List
•
Contact list
•
Central phonebook (system dependent feature)
•
Message inbox
•
Send Message
•
Change Profile Normal
•
Change Profile X (1- 4). (If selecting profile 1-4, the profile must first be
configured, see
6.6 Profiles
on page 45.)
•
Open Menu (Main menu, Calls, Call Services, Connections, Contacts,
Messaging, Services, Profiles, Settings.)
•
Executive Service X (1- 10) Services (Not applicable for WL3 Messaging)
•
Logout (applicable for the Shared Phone feature)Call Diversions
•
RSSI Measure
2
In the Value field, enter the applicable value. This is mandatory when using
Phone call function.
3
In the Control Question drop-down list, select “Yes“ if the Proceed? window is
displayed after the key is pressed. This is used to prevent a function being
accessed by mistake.
4
In the Read Only drop-down list, select “True“ if the user is not able to change
the shortcut.
1. Applicable to WL3 and WL3 Messaging only.