TD 92930EN
13 December 2013 /Ver B
Configuration Manual
WL3 and WL3 Plus WLAN Handset
38
6. Handset Configuration
NOTE: If configured, it is possible to dial any of up to five predefined emergency
numbers when the handset is locked, see
6.10.6 Emergency Call Numbers
on
page 58. It is not recommended to use Phone Lock when using the Shared
Phone feature, see
6.5.12 Shared Phone
on page 41
1
Select Device > Settings.
2
In the Phone lock drop-down list, select one of the following:
•
On - the handset will be locked after a few seconds when it is not used and a
password is required to open it again
•
On in charger - the handset is be locked when placed in charger.
•
Off - the phone lock is not activated.
6.5.3
Automatic lock time
When either the key lock or the phone lock is set to On, the lock is activated after the
specified time. It is possible to change the default time of 20 seconds.
1
Select Device > Settings.
2
In the Automatic lock time drop-down list, select desired time:
•
5, 10, 20, 30 seconds, 1, or 3 minutes.
6.5.4
Automatic key unlock
1
Select Device > Settings.
2
In the Automatic key unlock drop-down list, select one of the following:
•
On - the handset keypad is locked up automatically at incoming calls and
messages.
•
Off - the handset is not locked up automatically to avoid unintentional key
press
6.5.5
Audio adjustment
Select the volumes for the different audio signals in the handset.
1
Select Audio > Volume.
2
Select the appropriate volume type from the drop-down lists:
•
Handsfree volume
•
Headset volume
•
Speaker volume
3
In the Persistent volume drop-down list, select “Enable” to automatically store
volume changes in the handset for future calls.
The parameter affects the “Normal”, “Headset“, “Loudspeaking“ mode.
For selection of headset, see
Headset type
on page 38.
NOTE: Changing this parameter can result in lower sound quality and high sound level.
Evaluate carefully before applying.
6.5.6
Headset Configuration
Headset type
Select the headset model that is used.
