background image

Applications available on your OpenStage phone

49

Diagnostic information

V

Provides information on all of the important settings of the telephone. Can provide valuable help 
in support situations 

 Page 263.

Reset

Personal settings made via the telephone menu or the WBM interface can be reset to factory set-
tings. 

 Page 243.

Administration

You can access the administration area via the "Admin" function and by entering the administra-
tion password.

Refer to the administration manual for your phone for more detailed information on this topic.

Applications

E/A Cockpit

 

 Page 140

Help function

You can call up the "Help" function at any time, even during a call.

Calling up the "Help" function

Press 

y

. The "Help" function is activated.

During a software update, the phone must not be disconnected from the power supply unit, 
the LAN line or the phone line.

An update action is indicated by messages on the display and/or by flashing LEDs.

Summary of Contents for OpenScape Business

































































































































































































































































































Reviews: