background image

Phonebooks and call lists

155

Phonebooks and call lists

Personal phonebook

Your personal phonebook should not contain more than 1000 entries.

Creating a new contact

u

Press the key shown.

Select and confirm the option shown.

Select and confirm the option shown in the context menu.

The form for entering contact data opens.

Select and confirm the field you want.

j

Complete and confirm.

Select and confirm the option shown.

Editing a contact

u

Press the key shown.

Select the party.

Select and confirm the option shown in the context menu.

The form for entering contact data opens.

Select and confirm the field you want.

j

Complete and confirm.

Select and confirm the option shown.

Selecting a preferred phone number

If multiple phone numbers were assigned to a contact, you can select the pre-
ferred phone number here that you want to use for calls via the phonebook.

u

Press the key shown.

Select a phonebook entry.

Options

New contact

You do not have to complete all fields to save a new contact.

Last name

Save & Exit

Niels, Bohr

Details

Last name

Save & Exit

Niels, Bohr

Summary of Contents for OpenScape Business

































































































































































































































































































Reviews: