I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
10
timeout after 1 minute. A warning tone will be heard 10 and 5 seconds before this happens, either
caller may extend the call by pressing digits 1 to 9, to increase the call time in multiples of 30 seconds.
E.g. pressing '4' will increase the call length by 2 minutes before it is cut off.
Transfer the call as with announced internal transfer but dial an external number instead. Note that
the external number may also be dialled using any of the methods in the ‘Dialling Outside Lines’
section on page 9.
If an internal transfer call is not answered within 60 seconds the call is disconnected. The
original caller will hear engaged tone.
Trunk to trunk transfer will be subject to the normal call barring and account code checking as
normal external calls.
If an external call is transferred to an extension and not answered within 60 seconds, all
extensions will ring as if it is a normal incoming call for 30 seconds. If the call is not answered
within this time it is dropped. The system can be programmed to call back to your extension
first, before ringing all extensions, see page 49.
Account Codes
This feature is set up by the system administrator in order to keep a personal account of all external
calls. It is not possible to make external calls without first entering '**' followed by your secret
account PIN code.
Enter account code
Go off hook and dial the code shown, followed by your account PIN number. After entering the
code the call may be made in the normal manner as shown in the Dialling Outside Lines section on
page 9.
Brokerage Call
This feature allows you to switch between two calls without the other parties being able to speak to,
or hear one another.
Add an extension
While on a call dialling * after recall shows that the call is to be used in a brokerage call.
Add an exchange line
While on a call dialling * after recall shows that the call is to be used in a brokerage call.
Switch between calls
With a brokerage call set up one press of recall will switch between the calls.
Removing caller from brokerage call
Hanging up will drop the current call, the phone will ring back with the held call.
Call Diversion
This feature allows you to divert calls to another extension. There are four different types of call
diversion.
Divert all calls internally, all the time.
Divert all calls to an external number. The number must be one of the programmed system
speed dial numbers. The call will not be diverted if it rings at more than one extension, only
internal and external calls direct to the extension will be diverted.
Divert all calls internally if not answered after a number of rings.
tel number
Ñ
Ñ
Ñ
Ñ
call answered
Ò
Ò
Ò
Ò
or
tel number
Ñ
call answered
Ò
PIN
(now dial line and number)
ext. no.
number
or
number
Ñ
Ñ
Ñ
Ñ
ringing
Ò
Ò
Ò
Ò
