I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
2
Detection, Call Logging, DISA, System Integral Call Answering, Remote programming and many
others, Figure 1-1 shows many of the options available.
The System supports approved single line telephones (DTMF or pulse), modems, facsimile and
answering machines. In addition, a Standard and Executive Terminal are available which provide
extra features on the system. System capacity can be increased as follows:
Unifone 206: from 2+6 to a maximum of 3+8 using plug-in expansion cards.
Unifone 208: from 2+8 to a maximum of 6+12 using plug-in expansion cards.
Unifone 212: from 2+12 to a maximum of 6+16 using plug-in expansion cards.
System programming may be carried out at the master extension, this is extension 12 on the 206
system and extension 13 on the 208 & 212 systems. Programming is carried out using either a tone
phone or the built in menu commands of the Executive Terminal. A PC programming option is
supplied with the optional V24 Communication Interface expansion card.
There are two independent alarm loops which can be used to monitor the status of security doors,
gates and many other similar applications. Automatic external alarm calls (with voice messages if the
optional fax/voice card is fitted) can be made to programmed numbers such as mobile phones, in
the event that alarm contacts are triggered.
Figure 1-1 Expansion Options
System Capacity
Basic System Configuration
Feature
Unifone 206
Unifone 208
Unifone 212
Internal Links
4 (Fully non-blocking)
4 (Up to 4 internal
calls)
4 (Up to 4 internal
calls)
System Speed Dial
49 Per System, 25
Dialled Digits
99 Per System, 25
Dialled Digits
99 Per System, 25
Dialled Digits
Power fail extensions
11, 15 (Card 1 must be
1+2), 17 (Card 2 must
be 1+2)
11, 12, 21 (Card 1 must
be 1+2 or 2+2),
23 (Card 2 must be
1+2or 2+2)
11, 12, 25, (Card 1
must be 2+2B),
27 (Card 2 must be
2+2B)
Maximum terminals
6
10 (Not power-fail
extensions 11, 12)
12 (Cannot use power
fail extensions 11, 12,
25, 27)
DTMF Receiver
2 Per System
3 Per System
4 per system
DTMF Sender
1 Per System
2 Per System
2 per system
Alarm Loops
2
2
2
External music
on hold port
V24 Communication Interface
/ SMDR / RS-232C Serial data
interface card
2 standard Alarm sensor inputs
External Paging output
Door phone port and
control contacts
Extension ports:
PSTN Exchange line
and ISDN ports
Calling Line Identity
& meter pulse card
option
Expansion card 1:
2 extensions plus:
1 line (206)
2 lines (208/212) or
ISDN (208/212)
Expansion card 2:
2 extensions plus:
1 line (206)
2 lines (208/212) or
ISDN (both systems)
