I n s t a l l a t i o n & P r o g r a m m i n g M a n u a l
26
Feature
Programming Codes
Action
*9 PIN 455 ext #
Program ext. as a fax (no general calls, data protection)
*9 PIN 455 #
Clear fax extension
*8 45 line 6 #
Set fax ring cadence detection on a single line
*8 45 line 4 #
Set fax tone monitoring on a line
*8 45 line ans_type #
Set auto-answer fax tone monitoring on a line
Fax Call
Handling
(p 47)
*8 450 #
Clear automatic fax answering
*8 314 1 #
Held/transferred call rings back at last extension after
time-out
*8 314 0 #
Held/transferred call rings back at all extensions after
time-out
*8 23 delay #
Program call hold timeout delay (x 30s)
*8 221 delay #
Program call park timeout delay (x 30s)
*8 222 delay #
Program camp on call timeout delay (x 30s)
*8 223 delay #
Program attendant/door phone ring timeout delay
(x 15s)
*8 224 delay #
Program extension ring timeout delay (x 15s)
*8 225 delay #
Program unannounced transfer timeout delay (x 15s)
Hold, Transfer
& Ring
Settings
(p 49)
*8 226 delay #
Program call back extension timeout delay (x 15s)
*9 PIN 660 number #
Program immediate hot line number
*9 PIN 661 number #
Program Immediate hot line number & verify
*8 651 EXT #
Switch on immediate Hot line and assign to multiple
extensions
*8 650 EXT #
Switch off immediate Hot line for an extension
*8 661 EXT #
208/212: Switch on immediate Hot line and assign to one
of the high group extensions
*8 660 EXT #
208/212: Switch off Immediate Hot line fand assign to one
of the high group extensions
*9 PIN 680 number #
Program delayed hot line number
*9 PIN 681 number #
Program delayed hot line number & verify
*8 681 EXT #
Switch on delayed hot line & assign to an ext.
Hot Line
Programming
(p 50)
*8 680 #
Switch off delayed hot line
*9 PIN 791 ext. #
Enable extension paging and intrusion on busy calls.
*9 PIN 790 ext. #
Disable extension paging and intrusion on busy calls.
*8 3131 #
Switch on intrusion warning tone
Intrusion and
Paging rights
(p 51)
*8 3130 #
Switch off intrusion warning tone
*8 260#
Set all ISDN cards point to point mode
(then switch off / on)
*8 261#
Set all ISDN cards to point to multipoint mode
(then switch off / on)
*9 PIN 0100 num #
Program ISDN base number, card 1
*9 PIN 0100#
Clear ISDN base number, card 1
*9 PIN 0200 num #
208/212:
Program ISDN base number, card 2
*9 PIN 0200#
208/212:
Clear ISDN base number, card 2
*8 271#
Enable CLIR for system
*8 270#
Disable CLIR for system
*8 281#
Enable COLR for system
*8 280#
Disable COLR for system
*9 PIN 0 ext 0 num #
Program MSN number to extension
*9 PIN 0 ext 0 #
Clear MSN number from extension
*9 PIN 0100# 0100#
Clear all MSN numbers
*9 PIN 05 N 0 num #
Program MSN number to ignore (N=1 to 8)
*9 PIN 05 N 0 #
Clear entry from MSN ignore table
*9 PIN 0500# 0500-#
Clear all 8 MSN to ignore numbers
ISDN
Programming
(p 51)
*8 291#
206:
Enable analogue line 1
208/212:
Enable analogue lines 1 & 2
