SERVICE AND INSTALLATION MANUAL
Ice Maker Installation
INSTALLATION TYPES
This ice cube machine has been designed to be enclosed (as under a cabinet) It can also be free-
standing (using the supplied stability brackets) or built-in (sealed to the floor). In every case, there
must be adequate air space around the unit for ventilation purposes
Enclosed Installation:
An enclosed installation will allow you to install the ice cube machine under a counter or in a kitchen
cabinet provided the required clearance space around the ice maker is respected You must follow
the stated instructions for
a Electrical requirements
b Water supply
Free-standing Installation:
The ice cube machine can be installed to be free-standing in any place you desire provided you
have access to a water supply This installation has the same requirements as an enclosed installation,
plus you must also follow the stated instructions for Installing the Stability Brackets
Built-in Installation:
If this method of installation is chosen, it will still be necessary to allow adequate ventilation space
around the unit The following additional items must be observed
1 Place the ice cube machine in front of the installation location Raise the machine and place it on
the floor or on a platform depending on your installation requirements.
2 The water supply line must be plumbed before connecting to the ice maker
3 Turn on the main water supply and tap Check for water supply connection leaks Tighten every
connection (including connections at the water inlet)
4 If the electrical outlet for the ice maker is behind the cabinet, plug in the ice maker
5 Push the ice maker into position
6. Seal all around the cabinet to the floor with an approved caulking compound.
10
