2
Important Safety Considerations
When using this product, basic safety precautions should always be followed to
reduce the risk of fire, electrical shock, and injury to persons, including the following:
1
Read and understand all instructions.
2
Follow all warnings and instructions marked on the product.
3
Unplug this product from the wall outlet before cleaning. Do not used liquid
cleaners or aerosol cleaners. Use a dry cloth for cleaning.
4
Do not
use this product near water; for example, near a sink or in a wet area.
5
Do not
place this product on an unstable cart, stand, or table. The telephone can
fall, causing serious damage to the unit.
6
Slots and openings in the cabinet and the back or bottom are provided for ventilation. To
protect the product from overheating, these openings must not be blocked or covered.
This product should never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless the proper ventilation is provided.
7
This product should be operated only from the type of power source indicated on
the marking label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
8
Do not
allow anything to rest on the power cord. Do not locate this product where
the cord will be damaged by people walking on it.
9
Do not
overload wall outlets and extension cords, as this can result in the risk of
fire or electrical shock.
10 Never push objects of any kind into this product through cabinet slots, as they may
touch dangerous voltage points or short out parts that could result in a risk of fire
or electrical shock. Never spill liquid of any kind on the product.
11 To reduce the risk of electric shock, do not disassemble this product. Contact
qualified service personnel when some service or repair work is required. Opening
or removing covers may expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is subsequently used.
12 Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
A When the power supply cord is damaged or frayed.
B If liquid has been spilled onto the product.
C If the product has been exposed to water or rain.
D If the product does not operate normally when following the operating
instructions. (Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls can result in damage, and
will often require extensive repair work by a qualified technician.)
E If the product has been dropped, or the cabinet has been damaged.
F If the product exhibits a distinct change in performance.
13 Uniden works to reduce lead content in our PVC coated cords in our products
and accessories.
Warning:
The cords on this product and/or accessories contain lead, a chemical
known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
