Uniden UIP300 User Manual Download Page 45

Page: 45 / 48

Function Key Configuration

This option allows users to assign the function keys on the UIP300.

Select the appropriate function key (Speed Dial, Voice Mail, or Do Not
Disturb) and enter the associated telephone number (if necessary) and
click

Submit

The new settings are stored in the flash memory of the UIP300 and the page
is refreshed with the updated settings. If

Refresh

is clicked before

Submit

the values posted in the page are reset.

• The Speed Dial key assignment is only available for a telephone number and

not an IP address.

• If Speed Dial is selected, the speed dial number must be entered in the

corresponding phone number field.

• If Voice Mail is selected, the telephone number of the Voice Mail server must

be entered.

• Users cannot assign Voice Mail or DND to more than one function key.
• Telephone numbers should only be entered for Voice Mail and Speed Dial.
• Enter the “,” to insert a 2 second pause in the assigned number.

Figure 4-9 Function Key Configuration

Summary of Contents for UIP300

















































Search results

Summary of Contents for UIP300

Reviews:

Related manuals for UIP300

Brands by name

Popular brands

Uniden UIP300, User Manual

Search results

Summary of Contents for UIP300

Reviews:

Related manuals for UIP300

Brands by name

Popular brands