Uniden UIP300 User Manual Download Page 27 | Manualshive

Page: 27 / 48

background image

23

Call Log Submenu

There are two types of call logs – Incoming and Missed call logs – inside the Call
Log Menu. Besides the two types of call logs, the Call Log Menu also includes
the Delete Logs function as the third item. This function is used to delete all call
log records inside any chosen call log group. When a record is chosen, user can
apply one of the two functions– Delete and Date/Time – to the chosen record.

Call Logs

Incoming

Missed

Delete Logs...

Confirm Delete

Incoming Log

Missed Log

All Logs

Delete?

Date/Time?

Single Call

Record

Figure 4-1 Call Log Menu Structure

When

Menu

is first pressed, the Setup Menu and Call Logs submenu

are displayed.

Chapter 4 Setup Menu

General Information

This chapter describes how to setup and configure the UIP300.

The main setup and configuration menu is the Setup Menu. This menu consists
of three submenus and displays information about the UIP300:
• Call Log Menu – This submenu is used to set operations relating to incoming

and missed call log information.

• Phone Book Menu – This submenu is used for setting up any operations

relating to memory dial records.

• Configuration Menu – This submenu includes two types of configurations and

allows users to restore the factory default settings:
• Telephone Configuration
• Network Configuration
• Restore Factory Settings

• View Information – Displays the telephone IP address and firmware version.

Basic Setup Menu Options

This menu provides access to the three submenus: Call Log, Phone Book
and Configuration.

To access the Setup Menu:
1. Press

Menu

.

2. To navigate the submenu options, press the

and

keys. When the

desired submenu option is accessed, press the

Select

key to display the

selected submenu.

«
...
25
26
27
28
29
...
»

Summary of Contents for UIP300

















































Reviews:

No comments

Related manuals for UIP300

Brand: RAKINDA Pages: 20

Brand: Uniden Pages: 51

Brand: Radio Shack Pages: 28

80-6115-00 - AT&T E5813B - 5.8 GHZ Three Handset Answering System

Brand: VTech Pages: 53

Brand: L-3 Communications Pages: 312

Brand: Matosio Pages: 37

Brand: Talkswitch Pages: 65

EVITA Telephone

Brand: Topcom Pages: 8

Brand: Kodak Pages: 25

Brand: ACT Pages: 3

Brand: SpectraLink Pages: 1

Brand: Siemens Pages: 16

Brand: Siemens Pages: 23

Brand: Siemens Pages: 92

Brand: Siemens Pages: 166

Brand: Siemens Pages: 197

A31003-D3000-M100-01-76A9

Brand: Siemens Pages: 249

OpenStage 15 SIP

Brand: Siemens Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands