UIP200 User's Manual
Page 22 of 27
Rev. 1.0, © UAC, May, 2004
a new voice message arrives, the
VISUAL RINGER
LED illuminates to notify you
that a new message is waiting. To access your voice mail, follow the steps below:
Step 1: Pick up the cradle or press the
HEADSET
/
SPEAKER
key.
Step 2: Select the appropriate
1-
TOUCH
key. If you programmed the
DIAL
key as part of
the number, the phone will start connecting immediately; otherwise, connection
will start the after approximately 4 seconds.
Mute
Programmable Key 8 is pre-programmed as the
MUTE
key. During a call, you can
press
MUTE
to disable the microphone on the handset, speakerphone or headset.
While the Mute feature is activated, the
MUTE
LED remains on. To deactivate the
Mute feature, press the
MUTE
key again.
Dial (fixed key)
The
DIAL
key sends dialed digits without the usual four-second delay. The
DIAL
key
may be entered while programming a speed dial number to eliminate the delay
when speed dialing.
Emergency Proxy
The UIP200 provides an Emergency Proxy feature that allows the user to access a
SIP Emergency Proxy Server with pre-defined 2-digit dial plan. To execute a call
via the emergency proxy dial the two digit prefix followed by the number.
