UIP200 User's Manual
Page 11 of 27
Rev. 1.0, © UAC, May, 2004
#
#
#
#
#
#
#
#
#
Quality of Service (IEEE 802.1 p/q based and DiffServ)
Jitter compensation
10/100 Base-T Ethernet Interface
Additional 10/100 Base-T Ethernet Switch port for connecting a PC.
Operational Features
Terminal configuration
Firmware update via TFTP
Auto Configuration update using TFTP
Remote Reboot using NOTIFY event message
Password protection for configuration update
Control and Functions
To make phone operations easier and to avoid user confusion, many required
functions are already programmed into the fixed-function keys. There are 8 fixed
function keys in the UIP200.
Table 2 Control Keys and Their Functions
Key Situation
Operation
HEADSET
/
SPEAKER
On a call
Turns speakerphone/headset on and off
HOLD
On a call
Places the remote party on Hold.
One caller is on the line
Transfers the call to another number
XFR
/
FLASH
Call waiting tone sounds
Flash
Standby
Redials the last called number
DIAL
Entering numbers
Immediately sends entered digits.
Standby
Displays the main Setup menu
MENU
Within a sub-menu
Select
Manual configuration
Cancels configuration changes
When a phone number has
dialed but not connected
Cancels the dialing sequence and
returns the phone to standby
When entering character
strings or digits
Deletes the whole character string or
digits(s)
CANCEL
Setup menus
Cancels the operation and returns to the
previous menu.
On a call
Adjusts volume
UP
▲
and
DOWN
▼
In the setup menu
Scrolls through options
