40
Special Features
The scanner sets itself to program mode after you
store a frequency.
Setting the Search Range
You can use this mode to define the search range
used during a search in each search bank. To
change a search range, press
Func
and
PSrc
.
SRCH
appears. Then select a search bank.
When you select the search bank, the lower limit
and upper limit frequency assigned in the search
bank alternate on the display.
To select another search bank, press
Func
+
PSrc
or
Func
+ to increase the search bank number
or
Func
+ to decrease it. Hold down
Func
+ or
Func
+ for about 1 second to quickly move
through the search bank numbers.
After choosing the search bank, follow these steps
to set the lower limit and upper limit frequency.
1. Enter the lower limit frequency by using the 0-9
and keys.
2. Press
E
to select the lower limit frequency.
3. Enter the upper limit frequency by using the 0-9
and keys.
4. Press
E
to select the upper limit frequency.
Direct Entry Search
You can use direct entry search to search up or
down from the currently displayed frequency.
1. If the scanner is scanning or searching, press
Hold
.
UBC73XLT Paper OM.fm Page 40 Monday, May 14, 2007 9:13 AM
UBC73XLT OM.indd 40
23/9/11 1:50:31 PM
Summary of Contents for UBC73XLT
Page 57: ...57 Note ...
Page 58: ...58 Note ...
Page 59: ...59 Note ...
Page 60: ... 2011 Uniden Australia Pty Ltd Uniden New Zealand Limited Printed in PRC UBZZ01323FA 0 ...