background image

4

Contents

Contents

Introduction ............................................................ 6

Feature Highlights .................................................. 8

About This Manual  ............................................ 9

Understanding Scanning  ..................................... 11

What is Scanning?  .......................................... 11

What is Searching? ......................................... 11

Conventional Scanning  ................................... 11

Where To Obtain More Information ................. 13

Included With Your Scanner ................................ 14

Setting Up Your Scanner ..................................... 15

Using Internal Batteries ................................... 15

Using DC power .............................................. 19

Using AC Power .............................................. 20

Connecting the Antenna .................................. 20

Connecting an Earphone/Headphone ............. 21

Connecting an Extension Speaker .................. 21

Attaching the Belt Clip ..................................... 22

About Your Scanner  ............................................ 23

A Look At The Keypad  .................................... 24

A Look At The Display ..................................... 27

Understanding Banks ...................................... 29

Operation ............................................................. 30

Turning On The Scanner and 

Setting Squelch ............................................... 30

Storing Known Frequencies Into Channels ..... 30

Searching For and Temporarily 

Storing Active Frequencies  ............................. 31

Scanning the Stored Channels  ....................... 32

Manually Selecting a Channel ......................... 33

Special Features .................................................. 34

Close Call

TM

 RF Capture Technology .............. 34

Chain Search  .................................................. 38

Direct Entry Search ......................................... 40

Search Skip Memory ....................................... 42

Delay ............................................................... 43

Turning Channel-Storage Banks 

On and Off  ...................................................... 44

Locking Out Channels ..................................... 45

Contents

UBC73XLT Paper OM.fm  Page 4  Monday, May 14, 2007  9:13 AM

UBC73XLT OM.indd   4

23/9/11   1:50:18 PM

Summary of Contents for UBC73XLT





























































Reviews: