Uniden UBC73XLT Owner'S Manual Download Page 9

Page: 9 / 60

Feature Highlights

Key Lock

- lets you lock the scanner's keys to help

prevent accidental changes to the scanner's

programming.

Direct Access

- lets you directly access any

channel.

Display Backlight

- makes the scanner easy to

read in low-light situations.

Flexible Antenna with BNC Connector

- provides

adequate reception in strong signal areas and is

designed to help prevent antenna breakage.

Or, you can connect an external antenna for better

reception.

Memory Backup

- keeps the frequencies stored in

memory for an extended time if the scanner loses

power.

Three Power Options

- let you power the scanner

using internal batteries, external DC power using the

included cigarette lighter charger or external AC

power using an optional AC adapter.

Key Confirmation Tones

- the scanner sounds a

tone when you perform an operation correctly, and

an error tone if you make an error.

Battery Low Alert

- warns you when battery power

gets low.

About This Manual

The screen displays used in this manual are

representations of what might appear when you use

your scanner. Since what you see depends on the

frequencies for your area and the settings you select,

you might notice some differences between what is

in this manual and what appears on your scanner.

UBC73XLT Paper OM.fm Page 9 Monday, May 14, 2007 9:13 AM

UBC73XLT OM.indd 9

23/9/11 1:50:19 PM

Summary of Contents for UBC73XLT





























































Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands

Uniden UBC73XLT, Owner'S Manual

Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands