Uniden UBC73XLT Owner'S Manual Download

Page: 44 / 60

Special Features

frequencies into channels or when you search

frequencies. When the delay feature is on,

DLY

appears. If it is off, follow one of these steps to

program a delay depending on how the scanner is

operating,.

• If the scanner is scanning and stops on an active

channel where you want to store a delay, quickly

press

Func

Dly

before it continues scanning

again.

DLY

appears.

• If the desired channel is not selected, manually

select the channel, then press

Func

Dly

DLY

appears.

• If the scanner is searching, press

Func

Dly

while the scanner is searching.

DLY

appears and

the scanner automatically adds a 2-second

delay to every frequency it stops on in that band.

To turn off the 2-second delay, press

Func

Dly

while the scanner is monitoring a channel, scanning,

or searching.

DLY

disappears.

Turning Channel-Storage Banks

On and Off

You can turn each channel-storage bank on and off.

When you turn off a bank, the scanner does not

scan any of the 10 channels in that bank.
While scanning, press the number key that

corresponds to the bank you want to turn on or off.

Numbers appear at the top of the display, showing

the currently selected banks.
The scanner scans all the channels within the

displayed banks that are not locked out (see “Lock-

ing Out Channels” on Page 45). The bank number

flashes when the scanner scans a channel that

belongs to the bank.

UBC73XLT Paper OM.fm Page 44 Monday, May 14, 2007 9:13 AM

UBC73XLT OM.indd 44

23/9/11 1:50:32 PM

Summary of Contents for UBC73XLT





























































Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands

Uniden UBC73XLT, Owner'S Manual

Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands