Uniden UBC73XLT Owner'S Manual Download

Page: 37 / 60

Special Features

7. Press

while

C-C.PS

appears. One of the

following Pager Screen options appears.

PS On

: The scanner ignores hits on common

pager frequencies.

PS OFF

: The scanner alerts you when it receives

hits on common pager frequencies.

8. Repeatedly press or until the option you

want appears, then press

to select it.

9. When you select the option, press

Scan

to start

Close Call search. Otherwise, to continue normal

scanning, repeatedly press

Func

until disappears

then press

Scan

Using Close Call RF Capture

To turn on the Close Call feature, press

Func

once except in band select or program mode.

appears. Every 2 seconds, the scanner checks

for frequencies in the range you specified in “Setting

the Close Call Options” on Page 35 and interrupts the

audio when it checks for a Close Call transmission in

that range.
Notes:

• Set the squelch tight (where only strong signals

are received) while using Close Call.

• To continue scanning normally while the Close

Call feature is working, simply press

Scan

twice.

When the scanner finds a frequency, it sounds the

alert you specified in “Setting the Close Call Options”

on Page 35, and

Found

flashes. Press any key to

confirm the displayed frequency. Press

Scan

resume scanning. Or press or while the

frequency and appear to select the band where

you are searching.

UBC73XLT Paper OM.fm Page 37 Monday, May 14, 2007 9:13 AM

UBC73XLT OM.indd 37

23/9/11 1:50:30 PM

Summary of Contents for UBC73XLT





























































Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands

Uniden UBC73XLT, Owner'S Manual

Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands