Uniden UBC73XLT Owner'S Manual Download Page 46

Page: 46 / 60

Special Features

Follow these steps to select a different channel in a

bank as the priority channel.
1. Manually select the channel you want to select

as the priority channel.

2. Press

Func

Pgm

, then press

Func

Pri

appears to the left of the selected channel

number.

3. Repeat Steps 1 and 2 for the channel in each

bank you want to program as a priority channel.

To turn on the priority feature, press

Func

Pri

during scanning.

PRI

appears. Then the scanner

checks the designated priority channel every

2 seconds in each bank.
To turn off the priority feature, press

Func

Pri

PRI

disappears.

Using Keylock

Use the scanner's keylock to protect it from

accidental program changes. When the scanner's

keys are locked, the only controls that operate are

Scan

Func

Hold

, ,

, and

To turn on keylock, press

Func

appears.

To turn off keylock, press

Func

disappears.

Note: Using keylock does not prevent the scanner

from scanning channels.

Using the Display Backlight

To turn on the display light for easy viewing at night,
press . The display lights for 15 seconds. To turn
off the light sooner, press again.

UBC73XLT Paper OM.fm Page 46 Monday, May 14, 2007 9:13 AM

UBC73XLT OM.indd 46

23/9/11 1:50:33 PM

Summary of Contents for UBC73XLT





























































Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands

Uniden UBC73XLT, Owner'S Manual

Search results

Summary of Contents for UBC73XLT

Reviews:

Related manuals for UBC73XLT

Brands by name

Popular brands